Professional Electric Nail Drill | Manicure & Pedicure Kit

Yes — with the right approach. The key is always starting on the lowest speed setting and holding the drill lightly (like a pen) rather than pressing. The most common beginner mistake is pressing too hard, which generates heat and can thin the nail. Variable speed control is essential for this reason — keep it slow for your first 2–3 sessions while you develop the correct hand angle. We recommend watching a beginner tutorial for your first gel removal session specifically, as that is the most technique-dependent application.

Use the coarse cone or cylinder bit (typically the largest barrel bit in the set) for gel removal — at a low to medium speed. File from the centre of the nail outward in overlapping passes, removing the bulk of the gel without touching the natural nail. Once you're close to the nail surface, switch to a finer bit and complete the rest with a hand buffer or soft bit at the lowest speed. Never try to remove gel in one fast aggressive pass — multiple slow, light passes are far safer.

Battery life depends on speed setting — lower speeds use less power than full speed. On medium settings, expect enough battery for a full manicure and pedicure session in a single charge. Charge fully between sessions using the USB cable provided. The device charges via standard USB so any phone charger or laptop port works.

Yes — the drill works on toenails and fingernails equally. For pedicures, the coarse bits are particularly useful for reducing calluses and thickened toenail edges. Use a medium speed and work in smooth strokes. For gel toenail removal, the same technique as fingernails applies. The low-vibration design makes extended pedicure sessions comfortable, as there is minimal fatigue compared to manual filing of thick toenails.